Rigging 2060 tuffy dw

Empty Net Posted 12/28/2007 3:12 PM (#64271) Subject: Rigging 2060 tuffy dw Member Posts: 10 We are rigging a 2008 tuffy 2060dw with a 250 suzuki and are planning on using a powered jackplate 6" setback. was wondering if anyone had similar set up-- how fast, and how about ride quality? Fisherman Zach Posted 12/31/2007 10:16 AM (#64353 - in reply to #64271) Subject: RE: Rigging 2060 tuffy dw Member Posts: 64 Guess you are the first to rig like this Empty Net Posted 12/31/2007 10:50 AM (#64356 - in reply to #64353) Subject: RE: Rigging 2060 tuffy dw Member Posts: 10 Fisherman Zach, I have just received a response from an owner with a 225 opti on jackplate. He says it runs a little faster. Would definitly like to talk to someone with a 250 prefer suzuki, but any brand would give me a starting point to see on speeds/handling dakotaguide Posted 12/31/2007 3:45 PM (#64364 - in reply to #64271) Subject: RE: Rigging 2060 tuffy dw Member Posts: 6 i ran a 2060dw for 6 weeks while my 2060 tiller was getting made. we had a f250 yamaha with no jakeplate, the speed was 54mph. we tried diferent props,engine hight with no big change. the ride was smooth and dry but had the problem of the boat leaning to the left side.the speed was perty consistant with one or four pasengers. hope this helps wkw Posted 1/4/2008 4:47 PM (#64505 - in reply to #64364) Subject: RE: Rigging 2060 tuffy dw Member Posts: 12 My 2060 has a 250 Verado with no jackplate. Works perfect with a 24" 4-blade prop. Top end is 63-69 mph depending on load. zesto Posted 5/27/2008 9:54 AM (#69944 - in reply to #64505) Subject: RE: Rigging 2060 tuffy dw what 4 blade? I have the same set up with tempest (21 and 23) and I can not hit 60 mph WalleyeFIRST Posted 5/30/2008 11:45 AM (#70090 - in reply to #69944) Subject: RE: Rigging 2060 tuffy dw Member Posts: 1382 He has a 24p small hub trophy on the 250 Verado..