ranger 620 with 225HO E-Tec
mseybert
Posted 8/5/2008 5:41 PM (#72210)
Subject: ranger 620 with 225HO E-Tec


The other thread got me thinking about this setup. What prop are people running. My boat is a 2008 and I run a 14X21 Cyclone (4 blade). It gives pretty good holeshot and topend.

To keep the family happy, I have to pull them skiing sometimes. The holeshot with a skier in the water is a little lacking, I really need to get on plane quicker. Anyone have any advise?
Top of the page Bottom of the page
Tom22
Posted 8/5/2008 7:40 PM (#72217 - in reply to #72210)
Subject: RE: ranger 620 with 225HO E-Tec


Member

Posts: 94

Location: Saginaw Bay		I have the same motor on my 06 620.....i have a 22 Raker...Good hole shot. good top end,,and also pulls my son right up when wakeboarding....Tom
Top of the page Bottom of the page
Grouse
Posted 8/7/2008 1:46 PM (#72289 - in reply to #72210)
Subject: RE: ranger 620 with 225HO E-Tec


620 225 E-tec 22 Raker = Very satisfied Hit 58 last week with 3 guys in the boat and a load of gear. It was flat calm
Top of the page Bottom of the page
mseybert
Posted 8/10/2008 5:45 AM (#72363 - in reply to #72210)
Subject: RE: ranger 620 with 225HO E-Tec


Sounds like I may need to try a Raker. Anyone else have any opinions?
Top of the page Bottom of the page
smooth ride
Posted 8/29/2008 10:46 AM (#73031 - in reply to #72363)
Subject: RE: ranger 620 with 225HO E-Tec


07 620 running 22 raker readjusted motor on panther lift. two people all of the gear and run 63 consistantly.
Top of the page Bottom of the page