|
|
| If we have a fish on the fare out side board and drop the two inside back and bring the out side one up fighting a fish the these Church Walleye boards want to dive and will dive into the other two boards and one hell of a mess. We have the movable weight all the way back. Is there something we are doing wrong our should we just toss them and get the Off Shore boards. Thanks. |
|
|
|
Member
Posts: 34
Location: crosby MN | Clip on upside down !!!! |
|
|
|
Member
Posts: 344
Location: Manitowoc WI | dont get off shores! haha. do they have flag kits? i never had the problem till i added flags.. then i moved the i bolt and now they are fine.. i think it may have something to do with how you are fighting the fish..
Edited by budsbud66 8/18/2008 7:41 PM
|
|
|
|
Member
Posts: 1406
| spread your boards out farther and when you send the inside ones back, make sure they are clear.
Good Luck
Tyee
Edited by tyee 8/18/2008 8:39 PM
|
|
|
|
Member
Posts: 885
| Jim, Do you have the new high density foam installed in the back? Dominic |
|
|
|
| They have what ever foam that came with them. It seams to be a problem only on the outside one the two inside dont have that problem as often. This can be fighting a fish or just bringing in the outside one to check it. I am going to take a look and see if the line is dragging in the water or catching on some of the larger waves. Should the foam be replaced. |
|
|
|
Member
Posts: 885
| Jim, Replace the foam in the boards that have the original in the back if it is the open cell plastic looking material. I just went through the same thing with all 6 of my boards. I have 2 complete sets of Chhurch boards, (6 medium, 6 Walleye boards) After I replaced the foam on the oldest 6 walleye boards, I have not had a problem with them sinking all summer. My boards have tattle flags and the extra weight of a aaa battery holder mounted in the back for my led lights. Dominic |
|
|
|
Member
Posts: 617
Location: Oshkosh, Wisconsin | What PS said. Replace the foam and they will run a lot better. |
|
|