|
|
Member
Posts: 28
| I have a Evinrude 225HO that is mounted in the bottom hole (so the motor is as high as it can go). What bolt hole is typical for this motor running either a 3 blade raker 22 or a 4 blade cyclone 21.
What is the torque specs on the motor bolts?
Thanks Joe | |
| | |
| the 22 Raker II would be the prop. It has more bow lift and the vents really give it tremendous hole shot
As far as the hole position you can easily lower the engine to the 3rd hole (second lowest position possible). SImply by using the tongue jack you can lower the engine yourself if you are somewhat mechanical have some tools.
Tight Lines
Eric
| |
| |
|
Motor mount hole '07' Ranger 620