HDS 83 or 200...

iceman35 Posted 6/2/2009 5:50 AM (#81959) Subject: HDS 83 or 200... Member Posts: 650 got an HDS-8 on the dash and was wondering about running 83 or 200 on the transducer... easy to switch with the keys on the front by the way... read on another board that under 20 ft, run it in shallow mode... so I have it set on shallow mode... should I have it on 83 or 200... any other settings I should have on there? already cranked up surface clutter and interference... Don't get out as much as i want so if I can dial it in quick would be a big time saver... thanks... Shep Posted 6/2/2009 8:47 AM (#81964 - in reply to #81959) Subject: RE: HDS 83 or 200... Member Posts: 3899 200 KHz for shallow water. I'd say 60 feet or less. And 83KHz when you are running deep water with downriggers. The cone should be wider, and you should be able to see those down riggers easily at 83 KHz Bank Angler Posted 6/4/2009 2:20 PM (#82033 - in reply to #81959) Subject: RE: HDS 83 or 200... Run split screen with both transducers for a while and see which you like better for your application.