Bow Mount Wanted

Mr. Darboy Posted 6/18/2009 3:08 PM (#82529) Subject: Bow Mount Wanted Member Posts: 514 Location: Darboy USA Looking for new or gently used bowmount. 12V with at least 55# thrust. Minn Kota preference, but Motorguide possible as well. Let me know what you have. Brophy Posted 6/19/2009 8:40 PM (#82570 - in reply to #82529) Subject: RE: Bow Mount Wanted I have a minn kota 12volt 54 inch shaft 50 pound thrust. I took it in trade. I just went thru it. if intersted give me a call 248 640 5655 Brent sourdough Posted 6/21/2009 10:39 PM (#82612 - in reply to #82570) Subject: RE: Bow Mount Wanted New User Posts: 1 I have a Minnkota auto pilot with copilot 12 v but only 42 # thrust --new board on auto pilot-- used on a Lund 16 Mr. Pike. I haven't tried it since I put the new board in but I'm sure it works. the co=pilot was used very little. Sourdough Dan Van Oss Posted 6/23/2009 6:00 AM (#82643 - in reply to #82529) Subject: RE: Bow Mount Wanted I have a new in the box motor guide 24 v 75 lbs wireless remote e-mail me if interested at [email protected] Mr. Darboy Posted 6/24/2009 9:12 AM (#82662 - in reply to #82643) Subject: RE: Bow Mount Wanted Member Posts: 514 Location: Darboy USA Sorry Dan, need a 12v system. Still looking if anyone has one out there. CNY LEE Posted 6/24/2009 10:24 AM (#82664 - in reply to #82529) Subject: Re: Bow Mount Wanted Member Posts: 21 I have a 12v Minkota 50lb that I'm thinking about parting with, I've only used it 2 times and still have the box and all the paper work. Mr. Darboy Posted 6/24/2009 10:28 AM (#82665 - in reply to #82664) Subject: Re: Bow Mount Wanted Member Posts: 514 Location: Darboy USA Where are you located? How much do you want for it shipped to Appleton, WI? CNY LEE Posted 6/25/2009 5:30 PM (#82688 - in reply to #82529) Subject: Re: Bow Mount Wanted Member Posts: 21 I'm not sure on pricing seeing how it's still brand new and the motor has only been used 2 times, email me at [email protected] and we can try to figure something out. craig Posted 7/1/2009 3:44 PM (#82884 - in reply to #82529) Subject: RE: Bow Mount Wanted I got a minnkota 42"shaft 40lb foot controlled edge that is only 3 months old i am looking to sell or trade for something with more lb.thrust. preferably 55lb or more 12 v system. dont matter of it's cable steer/electonic/ hand controlled as long as it is bow mount. any taker please e-mail me at [email protected] nothing wrong with it, it just cant pull my 18 ft.alumacraft good enough for me when i am on erie .. thanks Doug Posted 7/6/2009 3:51 PM (#83026 - in reply to #82529) Subject: RE: Bow Mount Wanted Did you find a motor yet? I have a Minnkota Maxxum 65SC, 12/24V, 65lb thrust, 42" shaft. It has been used very little and is in excellent condition. It can be used either in a 12V or 24V setup. Located in Green Bay. Give me a call at 920-434-1435. Mr. Darboy Posted 7/6/2009 4:17 PM (#83032 - in reply to #83026) Subject: RE: Bow Mount Wanted Member Posts: 514 Location: Darboy USA No purchase yet, still looking. I'll let you know Doug, could be a good one for what I'm looking for.