Prop question
Guest
Posted 5/20/2010 10:42 AM (#91279)
Subject: Prop question


Looking for some help. I have a 2004 621 with a 250 2010 pro xs. Looking to see what type of prop i should use. Fish the bay alot. Looking for speeds in the mid to high 50's. Any help would be greatly appreciated. Now a guy that has a Enertis 3 23 pitch for sale?
Top of the page Bottom of the page
sworrall
Posted 5/26/2010 6:22 PM (#91418 - in reply to #91279)
Subject: Re: Prop question




Location: Rhinelander
That prop might be a little too much wheel for that rig.
Top of the page Bottom of the page
KHedquist
Posted 5/27/2010 5:55 AM (#91435 - in reply to #91279)
Subject: Re: Prop question



Member

Posts: 1991

Cheack out a Rev 4 possibly in a 21 p, I borrowed a friend with a 620, he is smilin picked up 3-4 mph
Top of the page Bottom of the page
tony
Posted 8/15/2010 8:11 AM (#93331 - in reply to #91279)
Subject: RE: Prop question


From what I've had on my boat is this, the 4 blade Revolution 21 pitch holds the boat in the rough water and higher speed turns better than other props I had tried. I had both a 4 blade and now went to a three blade 21 pitch Tempest speed is in the upper 50's but noticed the hole shot was better than the 4 blade. I probably should have played around pulling plugs out. Either prop will do fine with the XS motor you have, the next 621 I get will have a 21 pitch tempest on.
Good Luck,
Tony
Top of the page Bottom of the page