Cabelas AGM

Rich S Posted 12/19/2011 5:58 AM (#101834) Subject: Cabelas AGM Member Posts: 2300 Location: Berlin Any of you guys have these?  I am thinking of getting 4 of them in March.  I heard they do not have standard mounting posts? john mannerino Posted 12/19/2011 6:05 AM (#101835 - in reply to #101834) Subject: Re: Cabelas AGM Member Posts: 1188 Location: Chicago IL. Most people I have talked to don't like them. I went to interstate last year and not a problem. walleye express Posted 12/19/2011 10:57 AM (#101845 - in reply to #101835) Subject: Re: Cabelas AGM Member Posts: 2680 Location: Essexville, MI./Saginaw Bay. Used two with my 24 volt Motorguide 76# thrust for a little over a year. Their small, compact, don't hold a charge very long, let me down twice under moderate use and They Suck. MHO. Went back to reliable, heavy, cheap Interstate Monsters. Edited by walleye express 12/19/2011 11:06 AM Rich S Posted 12/19/2011 11:55 AM (#101847 - in reply to #101834) Subject: Re: Cabelas AGM Member Posts: 2300 Location: Berlin Thanks guys. I am going with the Sears platinum 31 for my cranking and electronics and standard deep cycles for my TM. esoxsmd Posted 12/21/2011 9:20 AM (#101896 - in reply to #101834) Subject: Re: Cabelas AGM Member Posts: 44 I'll jump in on this too... I've used them for 3 years now, and am having great luck with them. I have 2 24's running a 70lb Minn Kota and another 24 for starting / electronics. I am also using an on-board charger with a setting specific to AGM changing - not sure if that's the ticket for using these batteries.... but I like 'em.