Walleye Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [25 messages per page]

Walleye Fishing -> Walleye Boats and Motors -> boarding ladder
 
Message Subject: boarding ladder
regionguy
Posted 12/28/2015 4:54 PM (#113609)
Subject: boarding ladder


New User

Posts: 2

I am planning installing a boarding ladder on my 2008 Lund similar to the one shown (form a previous post). Securing it to the transom is no problem. My question is, what about the other end of the platform? There is a two inch ledge with aluminum plate but I am concerned about the "up"pressure that will be on that end of the platform when the ladder is used. Anyone come up with a way to secure down the forward edge of the platform?


Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window
Click to expand / contract the width of this image
(platform1.jpg)



Attachments
----------------
Attachments platform1.jpg (52KB - 289 downloads)
Top of the page Bottom of the page
Tunah1
Posted 12/6/2018 5:15 PM (#116634 - in reply to #113609)
Subject: Re: boarding ladder


New User

Posts: 3

When working on the transom be careful to keep the cap sealed on the top of the transom. I added a ladder to my 2006 Fisherman 8 years ago and drilled into the transom to mount the ladder and water got behind the aluminum and rotted the transom. Came in from the top under the cap. The ladder had different mounts but just caution to keep that back end water free.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)