Walleye Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [25 messages per page]

Walleye Fishing -> Walleye Boats and Motors -> boat berrings
 
Message Subject: boat berrings
bradley894
Posted 10/23/2007 12:39 PM (#62715)
Subject: boat berrings


Member

Posts: 591

Location: in the boat off the east shore somewhere
on a ranger trailer you have little windows with oil sloshing around in them, not like a berring buddy... on one axl the oil is milky .. is it simple to change ? do i need to change ? what to do? what to do? 06 package
Top of the page Bottom of the page
Grouse
Posted 10/23/2007 12:55 PM (#62716 - in reply to #62715)
Subject: RE: boat berrings


Bradley,

Check to see on the inside of the rim if there is some leaking of the oil from the inner seal. If not just drain it and refill. You will build some condensation in the oil resevoir over time, the wheel is hot when dipped in the water and the water is cooler, the more you launch your boat in a year the more of a condensation probelm you will have, it has been common for me to change about one time a year or so. If it starts looking like cottage cheese, then you need to worry.

Good Luck
Top of the page Bottom of the page
bradley894
Posted 10/23/2007 2:00 PM (#62723 - in reply to #62716)
Subject: RE: boat berrings


Member

Posts: 591

Location: in the boat off the east shore somewhere
thanks grouse .. it doesnt look bad yet just a bit clowdy... ill probly end up changing it... thanks agiain.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)