Walleye Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [25 messages per page]

Walleye Fishing -> Buy, Sell and Trade -> anyone need an old evenrude?
 
Message Subject: anyone need an old evenrude?
bradley894
Posted 8/27/2009 1:07 PM (#84609)
Subject: anyone need an old evenrude?


Member

Posts: 591

Location: in the boat off the east shore somewhere
i pulled this off a 16ft mirro i found. i did fire it after hooking up a batarie and hooking up the gas . it started and i shut it down. the motor sat in the weeds on the back of the boat for 2 or 3 years un used . always was reliable over the years for the guy who is now passed away... I would have it gone threw and the lower unit checked for leaks and stuff as i do not wanna be responsible . not sure the HP i figure between 35 and 50. i think its about a 62 model year. I have the controles and steering cable and even a counsel that can be mounted to the siderail of the boat. needs a good scrubbin and a going over but if someone wants the entire pile im looking for 250.00. thanks! Brad


Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window
Click to expand / contract the width of this image
(HPIM2820.JPG)


Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window
Click to expand / contract the width of this image
(HPIM2821.JPG)


Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window
Click to expand / contract the width of this image
(HPIM2819.JPG)



Attachments
----------------
Attachments HPIM2820.JPG (118KB - 113 downloads)
Attachments HPIM2821.JPG (127KB - 123 downloads)
Attachments HPIM2819.JPG (110KB - 125 downloads)
Top of the page Bottom of the page
BODE
Posted 8/27/2009 8:16 PM (#84629 - in reply to #84609)
Subject: RE: anyone need an old evenrude?


Member

Posts: 20

HELLO BRAD,
VERY INTERESTED IN THE MOTOR. WHERE ARE YUO AT?
DUANE
Top of the page Bottom of the page
bradley894
Posted 8/28/2009 9:19 AM (#84637 - in reply to #84629)
Subject: RE: anyone need an old evenrude?


Member

Posts: 591

Location: in the boat off the east shore somewhere
im 15 min east of baggo Kiel Wi. feal free to give me a buzz. 920 629-0812
Top of the page Bottom of the page
bradley894
Posted 9/11/2009 9:59 AM (#85116 - in reply to #84609)
Subject: RE: anyone need an old evenrude?


Member

Posts: 591

Location: in the boat off the east shore somewhere
STILL AVAILABLE and if not sold soon i will put it back on the boat go threw it completley and Re-list as a ready to roll package! anyone who wants to save now make me an offer! i have all controles and a councel framed in aluminum that will bolt to the siderale of any boat. electric remote and pull start. i have seen 40hp that look like this one its a big twin but not sure hp yet... gotta find time to diddle with it... thanks again.. Brad...
Top of the page Bottom of the page
Brother Otis
Posted 9/15/2009 8:38 PM (#85230 - in reply to #84609)
Subject: RE: anyone need an old evenrude?


About 10 years ago I recovered an old Elgin outboard from a shed at a construction job I was doing. Not sure of the horsepower, probably under 10. I never tried to start it and it needs to be cleaned up. I kept it because I'm a pack rat...

Any idea as to how much something like this would be worth?

Mark
Top of the page Bottom of the page
Rich S
Posted 9/17/2009 11:50 AM (#85267 - in reply to #84609)
Subject: Re: anyone need an old evenrude?


Member

Posts: 2300

Location: Berlin
I was hoping you would throw in a picture of you with the motor!! That way I know who you are when I see you.
Top of the page Bottom of the page
bradley894
Posted 9/18/2009 9:12 AM (#85294 - in reply to #85267)
Subject: Re: anyone need an old evenrude?


Member

Posts: 591

Location: in the boat off the east shore somewhere
Rich S - 9/17/2009 11:50 AM

I was hoping you would throw in a picture of you with the motor!! That way I know who you are when I see you.
lol Ok No Problem Rich... Anyone who buys this motor will recieve with it an autographed picture of me... it will look good in your trophy case. Brad
Top of the page Bottom of the page
bradley894
Posted 9/21/2009 10:47 AM (#85382 - in reply to #85294)
Subject: Re: anyone need an old evenrude?


Member

Posts: 591

Location: in the boat off the east shore somewhere
SOLD! Thanks
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)