| Here is everything you need to custom paint your own jigs and crankbaits. This is what I have:
(2) Air compressors. The one I normally use is a one gallon compressor, with a regulator attached. The other is a diaphragm compressor.
(2) Airbrushes – A Testors A4709 dual action airbrush with different nozzles perfect for applying the colors to jigs and cranks. The second gun is a HVLP sprayer used to apply clear coat.H
Spray booth, built with a furnace induction fan to pull vapor into a filter and exhaust duct.
Jig dryer to rotate jigs after vinyl coating for a no-drip finish. Extra motor as well.
(2) half mask respirators and about a dozen cartridges for use during clear coat.
(45) bottles of Createx Acrylic paint. Most are at least half full and colors range from primary colors, to fluorescents, pearls, and metallics.
1 quart of two part clear with only a little used out of it. Rock hard UV resistant finish your baits.
Tons of miscellaneous items. Jars for mixing, different holographic tapes, mylar for making stencils, paint pens for making eyes, vinyl jig paint, etc.
There is a ton of different items here. If you would like more info or pictures of the items, let me know. Just don’t have time to paint baits anymore and would like to clear out some space. All the items are used, but in good working order. Due to the amount and type of items, I don’t care to ship this, so pickup only or could possibly meet buyer.
Located in Wisconsin Rapids. I would like to get $300 for these items.
Call 715-213-5936 or email [email protected]
|
