Walleye Discussion Forums
| ||
View previous thread :: View next thread | |
Jump to page : 1 Now viewing page 1 [25 messages per page] Destinations and Fishing Reports -> Tuffy Boats -> Kicker Length |
Message Subject: Kicker Length | |||
KHedquist |
| ||
Member Posts: 1991 | Trying to remember on the shaft length needed on a Pro Kicker and a 1890? | ||
TJ DeVoe |
| ||
Member Posts: 1040 Location: Stevens Point, WI | 25 | ||
stacker |
| ||
Member Posts: 2445 Location: Fremont, Wisconsin | It is a 20 inch shaft. The 25 will drag in the water when idling and taking off and is not needed to reach the water when trolling. | ||
KHedquist |
| ||
Member Posts: 1991 | Thanks I double checked the model on mine it does show it being 20" | ||
brettking |
| ||
Member Posts: 38 | How about the 2060 can you use the short Merc on that as well? | ||
stacker |
| ||
Member Posts: 2445 Location: Fremont, Wisconsin | No, you cannot use a short shaft kicker which is a 15" shaft length with a 2060, 1890 or a 1760. You will gurggle the water everytime you come up on a wave. It has to be a 20" shaft which Mercury states to be a long shaft motor. The 25" shafts are mostly for I/O boats and sailboats. The are known through Mercury as a extra long shaft. There is no Out board walleye boat that needs a extra long shaft. Just remember that the 25" transom is down the middle of the boat and the "off to the side" placement of the kicker has 20" of transom there. Plus, you are not running on plane with the kicker. | ||
brettking |
| ||
Member Posts: 38 | Good to know thanks for the info. | ||
Shep |
| ||
Member Posts: 3899 | Model number for the Tiller Pro Kicker is F9.9ELHPB As Stacker said. Long shaft is 20 ". | ||
stacker |
| ||
Member Posts: 2445 Location: Fremont, Wisconsin | Shep - 2/1/2010 2:22 PM Model number for the Tiller Pro Kicker is F9.9ELHPB As Stacker said. Long shaft is 20 ". Model number is 1F10452EK and the desciption is a 9.9 ELHPT BF Pro-Kicker 4S Meaning= E=Electric start L= Long shaft H= Handle PT= Power Trim BF= Big Foot 4S= Four Stroke. | ||
TJ DeVoe |
| ||
Member Posts: 1040 Location: Stevens Point, WI | It's model number 1F10451HK if you want the tiller handle model, that's the 9.9 ELHPT BF Pro Kicker 20 inch shaft. The model you stated is without the Tiller Handle, it's only a 9.9 ELPT BF Pro Kicker. Edited by TJ DeVoe 2/1/2010 5:54 PM | ||
stacker |
| ||
Member Posts: 2445 Location: Fremont, Wisconsin | TJ DeVoe - 2/1/2010 5:52 PM It's model number 1F10451HK if you want the tiller handle model, that's the 9.9 ELHPT BF Pro Kicker 20 inch shaft. The model you stated is without the Tiller Handle, it's only a 9.9 ELPT BF Pro Kicker. You are correct TJ Thanks, I just picked up the wrong number | ||
Shep |
| ||
Member Posts: 3899 | stacker - 2/2/2010 9:10 AM TJ DeVoe - 2/1/2010 5:52 PM It's model number 1F10451HK if you want the tiller handle model, that's the 9.9 ELHPT BF Pro Kicker 20 inch shaft. The model you stated is without the Tiller Handle, it's only a 9.9 ELPT BF Pro Kicker. You are correct TJ Thanks, I just picked up the wrong number OK, I'm wrong. So is the sticker from my Pro kicker. 1F10451HK would be the MFG P/N. Pro Kicker does not come with Power trim. Only Power tilt, hence the P but no T. Attachments ---------------- Prokicker sticker.jpg (29KB - 153 downloads) | ||
lambeau |
| ||
my tiller handle is longer than your tiller handle. so there. | |||
stacker |
| ||
Member Posts: 2445 Location: Fremont, Wisconsin | hahahahaahahaha shep, did u draw that b on there? | ||
Shep |
| ||
Member Posts: 3899 | I don't draw. hehehe B stands for bigfoot? Whatever. | ||
Jump to page : 1 Now viewing page 1 [25 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2024 OutdoorsFIRST Media | About Us | Contact Us | Advertise
News | Video | Audio | Chat | Forums | Rankings | Big Fish | Sponsors | Classified Boat Ads | Tournaments | FAQ's
News | Video | Audio | Chat | Forums | Rankings | Big Fish | Sponsors | Classified Boat Ads | Tournaments | FAQ's