Walleye Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [25 messages per page]

Destinations and Fishing Reports -> Tuffy Boats -> X-190 prop selection / rpms
 
Message Subject: X-190 prop selection / rpms
lambeau
Posted 5/20/2008 12:20 PM (#69726)
Subject: X-190 prop selection / rpms


Tuffy X-190
Merc Opti 200hp
23p Tempest prop

i'm maxxing out at 5400 rpms when at full throttle and max trim regardless of load in the boat (one or two people, full or empty gas tank, gear or no gear, etc.).
with a loddy-doddy-everybody load i'm running 61mph, with just me and half tank of gas i'm hitting 64mph.

i'd like to get the motor rpms up to the recommended WOT of 5750 and pick up the extra couple mph's that'll come with it.

any suggestions on what prop selections to try?
more/less pitch?
bigger/smaller prop?
different prop style/blades?

also, does anyone know of a good place in south/central WI that i could go to test out a variety of props to see how they perform?

thanks!
Top of the page Bottom of the page
stacker
Posted 5/20/2008 1:53 PM (#69735 - in reply to #69726)
Subject: RE: X-190 prop selection / rpms


Member

Posts: 2445

Location: Fremont, Wisconsin
I have yet to play with the 190 but right off I think the small hub trophy will be the prop of choice. probably a 21 or so on that set up. The tempest is a good prop but you need more transom lift to have a balancing act. We have some in stock, give me a call, off on wednesdays, and we can talk about a trial date.

Denny

Fort Fremont Marine

920-446-3220
Top of the page Bottom of the page
KHedquist
Posted 5/20/2008 3:39 PM (#69742 - in reply to #69726)
Subject: RE: X-190 prop selection / rpms



Member

Posts: 1991

How high is your engine? I raised mine all the up had a little bit of blow out in rough water and a rooster tail, dropped it one perfect, 5700 rpm on my 1890, when I raised it I gained about 200 rpm from the the second to the lowest position
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)