|
|
New User
Posts: 2
| Subject: Yamaha 115 fourstroke / Lund Mr Pike 17 Prop question
I had this posted on Muskie First.
Thanks for the help.
My problem is I have already fixed my Aluminum prop twice and I am looking to upgrade to a Stainless Steel Prop.
Currently I have a stock Yamaha Aluminum 13X19 K prop and I am running at 5900 rpm at WOT.
Which prop would be recommended. I don't know what mounting hole my motor is mounted in right now. I do get cavitation when I make turns while running at 80% throttle.
I do have a slight bend in one of the repaired blades but not much. I am only looking to drop RPM's by 200-300.
Thanks
Steve
P.S. is anyone currently running the same rig? What props / rpm / performance are you getting out of it?
|
|
| |
|
Member
Posts: 3899
| Moreyes? WHat did you have on your rig like this? |
|
| |
|
New User
Posts: 2
| Shep,
Thanks for your help!
Steve |
|
| |
|
Member
Posts: 238
| I have 05 Mr Pike 17. Im running a SS Yamaha Pro 13 1/2 X 19. I run approx. 42mph....And I have had it up to 45.5mpg gps by myself. The motor is mounted in the 3rd hole. As in, if I go to the 4th hole that is as high as I can get it. |
|
| |
|
Member
Posts: 1991
| 19p Yamaha Pro Series same boat, 44 mph |
|
| |
