Viewing a thread - 2006 Lund Pro V 1975 - access to side counsel wiring

Walleye Discussion Forums

You are logged in as a guest. ( logon | register )

	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [25 messages per page] Walleye Fishing -> Walleye Tackle and Equipment -> 2006 Lund Pro V 1975 - access to side counsel wiring

Message Subject: 2006 Lund Pro V 1975 - access to side counsel wiring

Zappa

Posted 6/25/2014 2:17 PM (#112013)
Subject: 2006 Lund Pro V 1975 - access to side counsel wiring

New User

Posts: 1

Lost power to my stern electronics. No power when master power turned on, it must feed back to wiring harness under the captains side counsel to tie into the master power switch. How do I get access to the wiring as the space on the floor would need me to lose 300 lb to fit? Does the entire top assembly come off, there appears to be a series of bolts along outside perimeter on the top plastic moulding but getting access to the nuts on the inside seems to be impossible?

Appreciate some direction in how to access the wiring.

Thanks

Jump to page : 1
Now viewing page 1 [25 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread