|
|
| Is there a way to put ground speed on your sonar and/or mapping page? There is no ground speed in my overlay data, just wondering if I am missing something. Thanx Cory |
|
| |
|
Member
Posts: 2567
Location: Manitowoc, WI | It should be in the overlay data under GPS items. If it isn't, call me on my cell this afternoon Cory. |
|
| |
|
Member
Posts: 3899
| Cory,
Yes, you should be able overlay the ground speed on any page. When you go into the Overlay Data screen, hit enter to add. It should be under the GPS options. See below. I tried this with the 332 emulator, and I did not get the GPS option. Probably because I didn't have a GPS Receiver. Is your GPS Receiver connected and operating?
Attachments
----------------
 332.jpg (49KB - 167 downloads)
|
|
| |
|
Member
Posts: 105
| Okay ready for this....this will display your ground speed on the GPS page.
1) go to pages and get it so your screen has both the GPS and Sonar up in the split screen mode. Then you can adjust the size of the gps screen or sonar screen to the size you want it in the menu page of the sonar screen. You can bump back and forth between the two screen by using the arrow keys and then hit enter.
2) once you on the sonar screen hit the menu page TWICE it will bring up the back ground information. At the bottom you go to Customize and from there you can select different modes that you want displayed on the side of the GPS screen. They have the ground speed, trip log, odometer, etc. a ton of stuff that you can display.
I just got 3 lawrance untis on my in rig and this how I have to adjust my LMS480 on my front deck and they look pretty much the same so I would have to think that this will work for you. Try it....
Did I get this right guys? |
|
| |
