Today I got a heavy oil leak somewhere...oil filled up the bottom the motor cowl. I followed the twin hose from the external reservoir tank. One side goes into the block near the bottom (starboard side), the other goes to a square bass T-fitting. One hose off of the T-fitting goes up to the internal oil tank, the other hose is about 5 or 6" long and was connected to nothing. I am assuming this is where the oil was running out from. It hung staright down, kind of behind the starter. I can't see anything this should be connected to. I will run it on the hose and verify that is where the leak is coming from tomorrow and take some pics. I fely like BP at the boat launch with my big oil slick... Any ideas? It's a '91 Merc 135 HP (BlackMax) |