Walleye Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [25 messages per page]

Walleye Fishing -> Walleye Boats and Motors -> PRO V PROP QUESTION
 
Message Subject: PRO V PROP QUESTION
WALLYMITCH
Posted 3/23/2008 7:36 PM (#67467)
Subject: PRO V PROP QUESTION


New User

Posts: 2

i HAVE A 2003 1800 PRO V IFS WITH A 150 HR MERC EFI AND A 9.9 KICKER. with 2 PEOPLE AND 1/2 TANK OF GAS AND 1 LIVE WELL FULL i CAN ONLY GET 5200 RPM AND 45 MPH. i HAVE A LAZER 11 -19 PITCH PROP ON . IN YOUR OPIONS WHAT DO i NEED ON THIS TO GET MY RPMS UP TO 5700-5800 RPMS . THANKS FOR YOUR HELP IN ADVANCE.
Top of the page Bottom of the page
Almost-B-Good
Posted 4/4/2008 1:11 AM (#68008 - in reply to #67467)
Subject: RE: PRO V PROP QUESTION


Member

Posts: 102

Lighten the load a bunch or drop down to 17 pitch or probably even 15 pitch if you feel you need to rev it that much higher with a max fishing load. My old boat was a 18.5' Alumacraft deep V with a Johnson 150HP and a 15HP kicker. It ran 43mph with 3 people and gear WOT using a 19 pitch polished stainless three blade at 5300 RPM. The lighter the load the more pitch I could run. If I took off the bow trolling motor, front batteries, and kicker, put on a AL 21 pitch prop and ran alone it would hit 51 mph at 5400 RPM. I just resolved myself that a real fishing machine doesn't need to go extremely fast, just safely put you and your buddies in places to catch fish. My motor was a 1991 model and using that setup for that load it lasted 17 seasons so I doubt whether the lower RPM's hurt it any. The sweet spot for cruising was about 4500 RPM's and about 36 mph. A 19 pitch AL prop was slightly faster than the stainless one. A 20 pitch stainless was faster with a lighter load but was slower to plane with the full load and the 21 AL was a dog with the full load, so you can see, the changes in speed weren't much but the time to plane was more noticeable. Hope this gives you something to compare your setup with.
Top of the page Bottom of the page
T-Mac
Posted 4/4/2008 9:46 PM (#68042 - in reply to #67467)
Subject: RE: PRO V PROP QUESTION


Member

Posts: 142

Sold a number of those.
19p Tempest works very well.
Top of the page Bottom of the page
Cory Toker
Posted 4/5/2008 11:34 PM (#68060 - in reply to #67467)
Subject: RE: PRO V PROP QUESTION


Member

Posts: 8

What hole is your motor mounted in? Stainless props usually perform better with the motor a little higher. Bass and Walleye mag have a great article on a 2004 1800 pro v with a Yamaha 150 with a 21 stainless. With a reasonable load, they were getting just a tad over 50mph.
Here is the link to the article: http://www.bwbmag.com/output.cfm?id=943129

Cory
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)