|
|
| big question I want to try to make some floating harnesses only I dont know where to put the floater what to use and how to control how far up it will go do i put the beads on then the floater hope my questions help other people |
|
| |
|
Member
Posts: 32
| Make your leaders 3-4' long, start by tying on 2 #2 octopus hooks about 3-4" apart, slide on 4-6 beads, then slide on a Smile Blade by Macks lures, then a quality swivel - make sure you blow up the crawler, run it behind a bottom bouncer or a Tec Stic from Fin-Tech, these can be run very slowly and the blades will turn |
|
| |
|
Member
Posts: 32
| forgot to mention, putting a floater in the middle of the beads |
|
| |
|
| johnny do you use floaters and when is the best situation to use them in |
|
| |
|
Member
Posts: 32
| Pull bottom bouncers along weed edges, with the Smile Blades, you can go really slow, I have also just drifted with this setup, put a split shot 5 or 6 feet from spinner (enough weight to get to the bottom or very close) and let the wind push, this setup , at least with my experiance, works once the water reaches 50degrees or more, works in colder water, because you can go so slow |
|
| |
|
Member
Posts: 43
| Here are two pictures with some ideas for you. I characteristically use a 1/2 inch Lil Corky on my harnesses and also larger pill floats.
http://img.photobucket.com/albums/v602/tallmike/spinners1.jpg
http://img.photobucket.com/albums/v602/tallmike/spinners2.jpg
|
|
| |
|
| Thanks Rod holder those are beautiful looks like you really spent some time on them. I want to thank you and Johnnie V for the great response. I'm really surprised how little interest and help there was on this question especially with all the pros that are on this board thanks again johnnie V and Rod Holder |
|
| |
