|
|
Member
Posts: 2567
Location: Manitowoc, WI | I'm in the evaluation stage, trying to figure out which boat will suit me best for the types of fishing I like to do. I want a boat which I can use on the Bay, jig with in rivers, troll cranks on Winnebago, cast shorelines for smallies, and install downriggers on for salmon and trout. Which boat, in your opinion, is most versatile, allows the most space for multi species applications, and is best suited for what I'm looking for? I'm leaning towards five right now: Skeeter zx 2050 or wx 2100, Lund's various deep-v's, Ranger 620/621, Triton 215, or the Tuffy 2060? I'm looking for examples, especially of use on the Great Lakes for salmon/trout trolling. It's my plan to install a downrigger board with mulitple rod holders on this boat and I'll need to install/remove it as needed. Has anyone done anything like this? Pictures of this type of rigging would be great. Thanks!! |
|
| |
|
Member
Posts: 45
Location: Suring, WI | I think you would be best suited with the ranger 620. |
|
| |
|
| http://www.g3boats.com/AnglerVSeries/V210/ |
|
| |
|
Member
Posts: 591
Location: in the boat off the east shore somewhere | im not pimping these boats as i do not own one myself. but here is my perspective.. if you can justify the cash. the Ranger 621 is with no question the best over all riding boat. the 620 is nice also but the dif is huge on the bumpy stuff. i could consider the big Skeeter also as you bring up salmon fishing on the great lakes. the ride will keep you dryer! the sides are higher it seem for leaning on the rail with the net. you will get wet on windy days in almost anything but the skeeter is the dryest that i know. with a 21 footer a walk threw full glass is nice because there is room. all the boats you listed will do the job well. but if money is no object considering cost of ownership re-sale and such if im buying id buy the ranger 621. if as much as 50 percent of your time is salmon slamming or you want a higher sided boat id buy the skeeter. agian if someone gave me 50 grand and said pick one out. it a 621 for me. but i think you will hafta shop hard to get one set up for that. big lunds are sweet. big tuffys , big warriors too. there all sweet... my 10 cents after riding in them all pretty much. |
|
| |
|
Member
Posts: 3899
| I take it your years in the G3 have eliminated that boat from your list?
A good friend down Kenosha way got a Tuffy 2060 last year, and the first thing he did was put some downrigger mounts on it. I think he used the Cannon pedastal in the splashwell area on either side. Come to think of it, he has my Uni-troll downriggers yet! Anyway, he tried my rail mounts for the riggers, and didn't like them, so he got the pedastals. He is truly a multi-species angler, and spends as much time with his boys fishing panfish on small lakes as he does muskies and salmon on the big lakes. Loves his Tuffy 2060. I'll see if I can get some pics of his setup.
There are a lot of choices out there. All good boats, and motors. Pick a dealer you can work with, and that will give you great service. If you are looking at Tuffy, there's a couple guys around here that will offer up a demo ride. Right Ritch? |
|
| |
|
Member
Posts: 591
Location: in the boat off the east shore somewhere | one more thing. the only downside to ranger is there limmited dealer locations. service needed on the boats is rare but it can be inconveniant and the shops get busy. the outboard part of it can be taken to a dealer you trust as long as the brand is common for your aria. But the most important is the dealer you chose. set up is important and most of the issues you will face will be riggin so find one a dealer you like. with the money spent on electronics down riggers bowmount kicker motor and all the wireing its nice to have somone that will dig in and find the problem. also you can shop like heck for price but if there is a local dealer thats maybe a bit higher yet you like them .... For goodness sake . give them the job! and the extra couple bucks! |
|
| |
|
Member
Posts: 1656
| Jerry, any boat will work, some are better suited for YOUR needs/wants. Not worth the peeing match over whose boat is better. 
With that said, as you may know I have the 21MSX, I have a board that I use for salmon fishing, it's the same length as the beam of the boat. I clamp the board to the rails and it has a couple rod holders and 2 downriggers mounted on it. I use my rail mount rod holdrs for dipseys and boards. I generally run 6-8 line spreads with 3 people.
As for the shallow water, I also fish smallies on 'Bago in late summer, it is by far the most under rated fishery out there. Anyone who hates crowds should give Winnebago smallies a go in late summer. It's mostly shoreline fishing and the action can be fast and furious and there's nobody.....I mean nobody out there.
Good Luck |
|
| |
|
Member
Posts: 2393
Location: Waukesha Wisconsin | What is the price range? That will narrow your search a bit.
Jerry,
This whole conversation just seems weird being generated by you. With all of your experiences and all of the boats you have been in and around, I would think you would be more enlightened on this subject than most.
|
|
| |
|
Member
Posts: 57
| Hey Jerry I know you have your list already but have you thought of the Yar-Crafts? They have some really nice boats in your size range. |
|
| |
|
Member
Posts: 148
| G3 advantage 210 is a great boat, it's drier than a ranger, cheaper than a lund , matter of fact at the last boat show,there was a lund park right next to it they looked pretty close to me, actually the workmans ship was better,(fit and finish) and the price was alot cheaper than lund, it has alot of room, easy to fish out of , i had a ranger tired of getting wet, to low of sides when you get caught in big waves, best thing to do is go out and ride each boat, then make your dission, because everyone will say there boat is the greatest, also if it's in your price range,, just my thought (the other postings about G3 are not mine) FISHON GOTTA GO |
|
| |
|
Member
Posts: 2445
Location: Fremont, Wisconsin | The layout I would be looking for is simple. I would be looking for a boat that was open to the side of the boat as far back as possible. Meaning, my toes are against or darn near against the side of the boat. I would not want the Ranger with the side compartments that extend to the front of the boat along the gunwales. The easy answer? I would not want to be as old as jerry, kneeling on the storage compartments with 6 inches of side wall above them, reaching out over 6ft rollers trying to grab a ball to attach my line. Simple as that. Also I would not want my kids doing that either. If you think the 621 is the best ride Bradley, you need to ask for a ride in some other boats man.
But then again, Jerry should know what a G-3 can do 
Edited by stacker 5/11/2010 9:25 AM
|
|
| |
|
| I agree with stacker on this one. I fished in a ranger once and spent the day standing on the storage box's working the rods. Not where I would want to be fishing salmon on Lake Michigan. |
|
| |
|
| proeye - 5/11/2010 9:19 AM
G3 advantage 210 is a great boat, it's drier than a ranger, cheaper than a lund , matter of fact at the last boat show,there was a lund park right next to it they looked pretty close to me, actually the workmans ship was better,(fit and finish) and the price was alot cheaper than lund, it has alot of room, easy to fish out of , i had a ranger tired of getting wet, to low of sides when you get caught in big waves, best thing to do is go out and ride each boat, then make your dission, because everyone will say there boat is the greatest, also if it's in your price range,, just my thought (the other postings about G3 are not mine) FISHON GOTTA GO
Arn't you running Jerry's old boat ? |
|
| |
|
Member
Posts: 2567
Location: Manitowoc, WI | Dennis,
I agree, I've been in most and I have my preferences. I guess I could've worded this better.
What I'm looking for most are pictures/examples of various riggings, specifically, with downriggers, as I'm looking for something I can install in one of these boats that is easy to install and remove, plus gives the fisherman room to manuever. I'm also looking for ideas......how to rig a good downrigger/wire line/leadcore/dipsey board on a boat. One of the issues I had with doing this in past boats was I found these boards to be clumpsy to work around. I want something that's raised so I can get at the motors as I need to instead of diving over and laying atop of a board that's difficult to work around.
As it stand now, I am leaning towards the Skeeter zx 2050 or the Ranger 621. I almost bought a zx2050 a few weeks ago but it was sold before I could see it. I am looking to buy a used boat, as I cannot stomach the idea of putting $45-60K out for a new boat. My price range $20-35K.
Thanks for the help folks.....keep the ideas coming!!
Edited by jerry 5/11/2010 10:50 AM
|
|
| |
|
Member
Posts: 2393
Location: Waukesha Wisconsin | Jerry: Thanks for the clarification. It makes a lot more sense to me now. On past boats I installed the locking base (hopefully picture attached) for cannon downriggers and was extremely happy with its performance. if you wanted or needed additional height the enclosed pedestals could be added. On my Pro V - Lund's, the pedestal was not needed. I agree with the comments made by Stacker. None of us are getting any younger and the lack of deep sides would be a concern for me if I did a lot of trout and salmon. I'm hoping that Larry is monitoring this thread and chimes in with his ideas. He has his captain's license and does trout and salmon trips quite often. I know that he is very happy with his boat and the layout for doing this kind of fishing. he has a Triton I believe. I think that you would be very happy with the Skeeter. I looked at that boat long and hard prior to going with Lund. If they could have offered more on the sponsorship side, I would have taken the boat in a heart beat.
Attachments
----------------
 base.jpg (31KB - 574 downloads)
|
|
| |
|
Member
Posts: 3899
| Here is how I had my Lund set up. This would work on a lot of boats. Anchor down on the rails, or the cleats, if you don't have room for the mounts I used.
Attachments
----------------
Salmon1st.jpg (181KB - 4424 downloads)
|
|
| |
|
| I went through this same thought process a few years ago for the ultimate multi-species boat I live in kewaunee so fishing the big lake is important, they bay is next and I grew up in northern wisconsin so fishing a lot of inland waters is also important and with two little girls panfishing comes into play on some of the real skinny lakes where the landings aren't the best. I ended up with a 620 would have liked the 621 but couldn't justify the additional cost and I love it for everything I do, the one draw back is the storage in the rear when trolling but I do like the storage for equipment when traveling. My next choice would be the tuffy 2060 for that reason. I went from a triton to the ranger because of the quality of workmanship. Good Luck with your search Lots of different ideas of how to mount the downriggers. I personally like the pedastals |
|
| |
|
Member
Posts: 148
| Dear um no my boat is not jerry's And i get a new one each year (THANK YOU VERY MUCH) AND NEXT YEAR I WILL HAVE A DIFFERENT ONE WITH A NEW WRAP. FISHON GOTTA GO |
|
| |
|
Member
Posts: 148
| JERRY JUST GO AND GET YOUR SELF A NICE BIG GLASS BOAT . WITH A CUDDY CABIN, HEY ARE YOU GOING TO FISH ANY TOURNAMENTS OR YOU ALL DONE WITH THEM? O BY THE G3 MIGHT BE COMMING OUT A NEW 20' JUST LIKE THE NEW 18' THAT CAME OUT THIS YEAR. |
|
| |
|
Member
Posts: 1406
| Jerry,
As you know I have been running an older Tyee for some time. and quite frankly the ONLY reason I have not gone to a larger boat with bigger hp is because this is big enough for me. I think I would love a 620 or 2060 if money was of NO concern...I have been in many of them, but have found over the years that the bigger the motor the farther I want to go which of course costs more. Being an independant businessman I find it silly to spend that kind of cash. and seeing that you live on the big lake I would invest in a 24'/25' lake boat as that is where you will probably spend most of your time.....Now the best part is you want to fish Bago, the bay, fox, wolf and maybe a lake or two up nort...I'd get an additional 18' Lund Alaskan with the a 60-90 hp. Rig it for boards and best of all you can get both of these rigs for the price it will cost you to run what you listed above. Taking downriggers on and off will NOT happen after the first year so take it out of the solutions. Mine have never left my Tyee in 15 years quick release brackets are the best and the green treated carpeted boards that they and the rod holders mount on have been on there since day one.....By the way my Tyee is up for sale and would consider trades on a nice 18' Alaskan if you know where i could find one!
Good Luck
Tyee
Good Luck
Tyee |
|
| |
|
| I fish the same waters and have the same wants in a boat. I'm not sure how to upload pictures, but I mounted Cannon Side Mounts directly to my gunwhale and put tab lock bases on top for easy removal. I felt that was a little bulky for the 80% of my time when I wasn't using downriggers so I then mounted a custom-made plate in the same verticle position with tapped holes that I screw the Side Mount to when I hit the big pond. Now, I have a small rectangular aluminum plate that sits on the verticle wall of my gunwhale about where my splashwell starts when I don't need downriggers. Almost unnoticable. Mounting is as simple as screwing in 4 bolts.
Personally, I really don't like the 'board across the back' trick. It makes it tough to net fish and in my opinon just gets in the way.
As far as boats, I think you've put togther a list of the best multispecies boats for the great lakes area. Good enough for Michigan/Superior/Erie/etc on most days (not counting the days even the charters cancel) yet small enough to fish a lot of smaller lakes and rivers for panfish, bass, musky, etc. In my opinion, none of them make it EASY to solidly mount downriggers, but it's doable. Pedestal mounts in the splashwell or side mounts like described above work well... just requires some time and $. If I were you, I'd go with the Skeeter for the higher sides. The Rangers are awesome, but a little more scary on Michigan for the reasons mentioned above. Less likely to spear a wave in the Skeeter too. |
|
| |
|
Member
Posts: 80
Location: Lake Erie | I won't comment on some of the other comments made in prior threads because some are just laughable. I think most can see which ones they are pretty easiely. I'm a multi species angler myself fishing Erie 90% of the time and lake ontario the other 10% salmon fishing, troller exclusively. I have my 621 rigged to the max and it does a fine job and for my likens and many other Ranger owners once you have the side compartments for ease of storage/rigging you won't be able to live without them I can fit everything I need in my boat for any type of fishing without ever having to take stuff in and out of my boat because it all actually fits. In other boats they just flat out don't have the amount of storage. For boats that don't have side bins you end up putting boxes or bags your using on the floor then you end up tripping over them while fishing which i hate doing, I do this when on friends boats. While riggin flasher fly's, inline weights, blades & spinners, opening crank boxes you can rig whatever you want and sit on the side bins and not be in another guys way in a Ranger, with two other anglers sitting in the front two seats or have two guys in the back sitting or standing and two near the consoles plenty of room for 4 guys to walleye or salmon fish with ease even if they are big fellas which me and alot of my crew are.
On my 621 I have 6 inch tracks mounted on the rear corners with backing plates underneath with Vector riggers sitting ontop 6 inch cannon swivel pedestals, my friend made me 2 additional mounts with thumb screws so when I want to put my cover on I unscrew 4 thumb screws set my riggers on my side compartments leave the pedestals in the track and put my cover on. The electrics are wired one per side my boat is an 08 so the batteries are still in the side 2 bins not in the floor so the wiring was a snap. On Rails I have Cisco triples and single cradles, I run inline boards off the tubes and wire divers off the cradles or off the duel vector holders on the rigger rod holders. If you have any questions let me know. I don't think you can go wrong with the Skeeter or any other top made glass boat but IMO nothing like the fit finish and functionality of a Ranger. Email me for tons of pics, I have shots of everything rigged for walleye and salmon and in action so you can see how I did it. here's one.
Attachments
----------------
100_0585.JPG (125KB - 2633 downloads)
|
|
| |
|
Member
Posts: 650
| Tuffy offers a wide open layout and the optional rear deck is a good choice for bass fishing... my 1760 is a great multi species boat in a smaller package. I can't comment about downrigger mounts but tons of mounting options out there...
Good luck in your search... hint... check the classifieds at different online boat sales for pics of different rigging... was a few 2060's in the clasifieds here... |
|
| |
|
Member
Posts: 2445
Location: Fremont, Wisconsin | Thanks for the picture kgonefishing, That is exactly what I meant when I said that you would have to kneel down to set a rigger. I guess it would be OK if I was younger. |
|
| |
|
Member
Posts: 344
Location: Manitowoc WI | 219TFX takes my vote. I don't wanna get into anything.. but Yar-Craft has always made one of the best built boats on the market! I don't think many could disagree. |
|
| |
