Viewing a thread - Playing with Engine height

Walleye Discussion Forums

You are logged in as a guest. ( logon | register )

	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [25 messages per page] Destinations and Fishing Reports -> Tuffy Boats -> Playing with Engine height

Message Subject: Playing with Engine height

KHedquist

Posted 9/11/2007 3:57 PM (#61131)
Subject: Playing with Engine height

Member

Posts: 1991

Well I got a lifting ring for my OPTI, I have been playing with engine hieght, I have been raising it one hole at a time.

Well so far I have it as high as it would go now, I have good water pressure, no blow out in corners etc...

I am running a REV 4 21p.

I have gained some rpm and speed, did not get alot of time on it like this yet, I ran it in the 4th hole friday all day on the river with good results.

I talked to out local high perf merc shop and researched the net and from what I could come up with 12 psi at wot is ok.

BTW I peeked over the transom at WOT and the cav plate plate and it is only 1/2" -1" above the water in the highest position

Jump to page : 1
Now viewing page 1 [25 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread