Walleye Discussion Forums
| View previous thread :: View next thread | |
| Jump to page : 1 Now viewing page 1 [25 messages per page] Walleye Fishing -> General Discussion -> T.H. Thumpers & Holy Rollers. |
walleye express |
| ||
 Member Posts: 2680 Location: Essexville, MI./Saginaw Bay. | No, this isn't a post about Southern Baptist habbits of rolling in the isles. Or some new religious sect or newly discovered Texas underground compound called the Thumpers. It's to show you guys a combination of both new and old school Tommy Harris blades I had order for this summers trolling season. The size #7 and #8 blades are what I call the thumpers. I've seen few other blades throw off more of a flash then these monsters. And along with the success I had running them last year, two other things happened that I witnessed and never experienced before when running them walleye trolling that stands out in my mind. Firstly, with how clear the water column has become on the Saginaw Bay, these things throw off a flash that can be seen over 30 feet away and several feet down in the water column. And I mean the whole surrounding area in back of the boat is flashing when a hooked fish is getting near, and I'm standing at the back ready (net in hand) looking down and waiting for a charter client to bring the fish up behind the boat. On one of these occasions I saw another walleye chasing and striking at the blade while his buddy was being keel-hauled in at the end of the harness. I know all of you have seen this before and it is quit common with bass, pike and a few other type fish species, but this was my first time seeing it with walleyes. Then on another occasion we had a double on fishing in 23 FOW. I could tell one of the walleyes was a bigger fish so we landed the smaller fish first. I removed the smaller one, threw him into the cooler, straightened the Gulp nightcrawler back onto the harness and lowered it just a few feet back into the water behind the boat, so it would not swing around and get tangled while we netted the bigger fish. This rig was no more then 6 feet down and maybe 15 feet behind the boat, and remember we were in 23 FOW. As I got ready to net the bigger fish the rod I just laid down bent and started overboard. I thought because of it's short distence out, it had gotten tangled in the trollling motors prop. But about an 18 incher had come up and slammed this rig virtually in the prop wash. I jumped on the rod before it went over, but that to was a first for me in that deep of water. As for the blades Tommy calls Holy Rollers, the smaller ones with the holes in them, I cannot vouch for their effectiveness. I've seen them before, mainly much bigger blades like them tied in on Lake Trout Cow Bells, but have never used them with harness rigs. The hole is supposed to throw the rotation of the blade off slightly and even create some cavitation bubbles occasionally when rotating, adding both more sound and a visual effect to the rig. That makes sense to me, and having something new to try always appeals to me. Edited by walleye express 4/10/2008 4:45 PM Attachments ----------------  IM001645.JPG (83KB - 117 downloads) IM001646.JPG (67KB - 117 downloads) IM001649.JPG (59KB - 131 downloads) IM001650.JPG (88KB - 110 downloads) IM001653.JPG (68KB - 139 downloads) IM001654.JPG (98KB - 117 downloads) | ||
| |||
| walleye express |
| ||
Member Posts: 2680 Location: Essexville, MI./Saginaw Bay. | I think I like my second batch better with all solid colored beads on the harness. What do you guys think?  Attachments ---------------- IM001656.JPG (109KB - 120 downloads) | ||
| |||
| D. Landahl |
| ||
| |||
| walleye express |
| ||
Member Posts: 2680 Location: Essexville, MI./Saginaw Bay. | You at the same address Dave?  | ||
| |||
| orchard frank |
| ||
| |||
| walleye express |
| ||
Member Posts: 2680 Location: Essexville, MI./Saginaw Bay. | |||
| |||
| D. Landahl |
| ||
| |||
| orchard frank |
| ||
| |||
| Jump to page : 1 Now viewing page 1 [25 messages per page] |
| Search this forum Printer friendly version E-mail a link to this thread |
