Viewing a thread - Coil on 1975 Johnson 25hp

Walleye Discussion Forums

You are logged in as a guest. ( logon | register )

	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [25 messages per page] Walleye Fishing -> Walleye Boats and Motors -> Coil on 1975 Johnson 25hp

Message Subject: Coil on 1975 Johnson 25hp

Viking

Posted 7/10/2009 11:59 AM (#83166)
Subject: Coil on 1975 Johnson 25hp

Member

Posts: 1314

Location: Menasha, WI

I've got a bad coil on my 1975 25hp Johnson. Two questions: 1) Do I need to replace both coils if only 1 is bad? 2) Are the Sierra parts decent quality? They are about 1/2 the price of OMC parts.

RodBend'r

Posted 7/10/2009 12:18 PM (#83167 - in reply to #83166)
Subject: RE: Coil on 1975 Johnson 25hp

Member

Posts: 53

Yup.... you can just replace the one coil assy. I would take the good (old) one out and cut the plug wire end off a bit and re-thread it back into the coil..... clean the points and get the timing just right.... you'll be back in business in no time.

Sierra parts are fine.

sworrall

Posted 7/12/2009 8:08 AM (#83193 - in reply to #83166)
Subject: Re: Coil on 1975 Johnson 25hp

Location: Rhinelander

I use Sierra parts for our older motors too. No problems.

Jump to page : 1
Now viewing page 1 [25 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread