Walleye Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [25 messages per page]

Walleye Fishing -> Walleye Boats and Motors -> Lowrance X67C
 
Message Subject: Lowrance X67C
dadshamp
Posted 4/12/2005 12:21 PM (#30963)
Subject: Lowrance X67C



New User

Posts: 4

Location: Elk River, MN
Hey guys. I have a Lowrance X67C. Sudddenly this year, it seems to be working intermittently. Oddly, it seems as if will only register depths less than 20 ft (appx). It will work fine for a few minutes and then the display slows down to a crawl, becomes cluttered and my depth display number will just continuously flash. You can still see the contour of the bottom somewhat, but it is not as defined as when its working properly and the screen has more clutter on it. If I shut it off and turn it on again, the depth sits at 0 and flashes. The temp is reading just fine as far as I can tell. Then after I move the boat to another depth, it will come back on for a bit and work fine, then go away again. I have turned all other accessories off as well as the boats ignition.


HELP!...lol

Thanks guys...

Jim

--------------------
Fear No Fish


Edited by dadshamp 4/12/2005 2:55 PM
Top of the page Bottom of the page
Gordy
Posted 4/13/2005 5:28 PM (#31025 - in reply to #30963)
Subject: RE: Lowrance X67C


Member

Posts: 279

Location: Rockford MN
Jim it sounds like a transducer problem, the unit sounds like its searching to find the bottom and bumping the power up. I would try to find someone with the same unit and try there transducer with you're unit. Maybe take it to where you bought it and see if they will help you out. If all else fails you can call Lowrance to see what they might suggest. Also check it out at home on the driveway, you can turn it on and you should hear it ping loud!
Top of the page Bottom of the page
dadshamp
Posted 4/13/2005 6:10 PM (#31029 - in reply to #31025)
Subject: RE: Lowrance X67C



New User

Posts: 4

Location: Elk River, MN
what will I hear pinging? The transducer?

Thanks for your info..

Jim
Top of the page Bottom of the page
jerry
Posted 4/13/2005 6:37 PM (#31031 - in reply to #30963)
Subject: RE: Lowrance X67C


Member

Posts: 2567

Location: Manitowoc, WI
Yes, you should be able to hear and feel the transducer ping. Put your hand on the bottom of it. If it doesn't give out a continuous rhythm ping, then there's a problem with the transducer.
Top of the page Bottom of the page
dadshamp
Posted 4/13/2005 9:11 PM (#31036 - in reply to #31031)
Subject: RE: Lowrance X67C



New User

Posts: 4

Location: Elk River, MN
Transducer IS pinging
Top of the page Bottom of the page
jerry
Posted 4/14/2005 12:13 AM (#31037 - in reply to #30963)
Subject: RE: Lowrance X67C


Member

Posts: 2567

Location: Manitowoc, WI
If there is a specific action which causes the locator to not read properly, then I would call Lowrance about it. The technicians there should be able to do some diagnosis over the phone with you. Was the locator doing it when you turned it on to check the ping? If it was and you can feel and hear the ping and it is a consistent rhythm, then it will need to be sent into Lowrance for repair. Be sure to have your receipt from the purchase of this unit so they honor the warranty.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)