Viewing a thread - Shoot-Through Transducer

Walleye Discussion Forums

You are logged in as a guest. ( logon | register )

	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [25 messages per page] Destinations and Fishing Reports -> Tuffy Boats -> Shoot-Through Transducer

Message Subject: Shoot-Through Transducer

Cast-n-blast

Posted 3/27/2007 8:01 AM (#53096)
Subject: Shoot-Through Transducer

Member

Posts: 25

Where on a 1760 DW would a person mount the shoot through to get a good reading at any speed. Where is the deadrise area located?

Tuffy Boats

Posted 3/27/2007 10:04 AM (#53108 - in reply to #53096)
Subject: RE: Shoot-Through Transducer

Deadrise is a measurement, not a location. You will need to position the transducer in the very rear of the hull interior back in the bilge. you can place the transducer port or starboard some, but remember that this is a high performance hull and very little is in the water when it's 'aired out'.

Jump to page : 1
Now viewing page 1 [25 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread