Viewing a thread - lowrance 5300C IGPS

Walleye Discussion Forums

You are logged in as a guest. ( logon | register )

	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [25 messages per page] Walleye Fishing -> Walleye Boats and Motors -> lowrance 5300C IGPS

Message Subject: lowrance 5300C IGPS

silvermolar

Posted 9/4/2007 7:11 PM (#60852)
Subject: lowrance 5300C IGPS

New User

Posts: 2

has anyone used this new gps unit?? and if so is there additional wiring needed to make this unit operational. i understand that it has a built in antenna but i heard that additional T conectors are needed thanx.

Shep

Posted 9/6/2007 7:33 AM (#60907 - in reply to #60852)
Subject: RE: lowrance 5300C IGPS

Member

Posts: 3899

You should not need additional T connectors to use the unit stand alone. If using standalone, and the internal antenna, you will only connect the unit power. If you are using this unit to power a NMEA 2000 network, then you should also have switched power to that cable as well. If you are adding this to an existing NMEA 2000 network, you would only power the unit. You will need a node T and cables to add to an exisitng network.

Jump to page : 1
Now viewing page 1 [25 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread